Manual Editing - Sony RM-450A Mode D'emploi

Manual Editing

30
1
RESET
HOURS MINUTES SECONDS FRAMES
PLAYER
POWER
ON
STDBY EJECT
OFF
PLAY STILL REW FF
REVERSE FORWARD
2
SHUTTLE JOG
1
Selecting the edit mode
Press the ASMBL button or the desired insert button(s): V, A1 and A2.
The lamp(s) of the pressed button(s) light.
2
Searching for the IN point
Search for the IN point and go back to several seconds before that
point. Then play back both the recorder and the player.
3
Starting the edit
Press the EDIT button and PLAY button for the recorder
simultaneously at the IN point.
Editing begins.
4
Completing edit
Press the ALL STOP button when you find the OUT point.
Editing stops and both the recorder and the player shift to the stop
mode. If you press the PLAY or STILL button of the recorder instead,
editing also stops but the VTRs shift to the mode of the button you
pressed.
Notes
• To have an edited picture as stable as possible, start playback at least 5
seconds ahead of the IN point.
• Do not start editing from the still mode. Otherwise, the edited picture
will be distored.
• A still picture cannot be recorded with a VTR having no dynamic
tracking function.
SERVO IN OUT IN OUT SERVO
EDITING CONTROL UNIT RM-450A HOURS MINUTES SECONDS FRAMES
ASMBL V A1 A2 REC
EDIT MODE
– +
PLAY
AUDIO SPLIT TRIM LAST EDIT
REVERSE
IN OUT GO TO IN OUT
PLAYER RECORDER
ENTRY
SHUTTLE
AUTO EDIT RVW
PREVIEW ALL STOP
/END /JUMP
RESET TOTAL
RECORDER
EDIT STDBY EJECT
3
STILL REW FF
FORWARD
JOG
4