Useful Editing; Quick Editing - Sony RM-450A Mode D'emploi

Useful Editing

Quick Editing

In this section, useful edit operations are described.
• Quick editing: You can enter the OUT point during the preview
operation.
• Butt edit: You can continuously edit by searching for the IN point only
on the player.
• Split editing: You can independently insert audio or video signals at
each IN point.
• Using a VTR with the dynamic tracking function: You can control the
VTR with the dynamic tracking function as a player from this unit.
• Editing with a live source: You can edit material supplied from a
camera.
You can save time by entering edit points while the unit is in the preview
mode.
IN indicator
RESET
HOURS MINUTES SECONDS FRAMES
POWER PLAYER
ON
STDBY EJECT
OFF
PLAY STILL REW
1
REVERSE FORWARD
3
SHUTTLE
2,4
1
Searching for the IN points
Locate the scene for the IN points on both the recorder and the player
with the search dial, and display the still picture of each point.
2
Preview
Press the PREVIEW button.
The position when you pressed the button is automatically entered as
the IN point. The respective IN indicators light and the preview starts.
3
Determining the OUT point
Determine the OUT point while observing the monitor, then press the
OUT and the ENTRY buttons simultaneously.
This point is entered as the OUT point and the OUT indicator which
was blinking is now lit.
After 2 seconds, both the player and the recorder stop.
OUT indicator
SERVO IN OUT IN OUT SERVO
EDITING CONTROL UNIT RM-450A HOURS MINUTES SECONDS FRAMES
ASMBL V A1 A2
EDIT MODE
– +
FF
AUDIO SPLIT TRIM LAST EDIT
IN OUT GO TO IN OUT
PLAYER RECORDER
ENTRY
JOG
AUTO EDIT RVW
PREVIEW ALL STOP
/END /JUMP
RESET TOTAL
RECORDER
REC EDIT STDBY EJECT
PLAY STILL REW FF
REVERSE FORWARD
SHUTTLE JOG
5
(Continued)
23