First Switch-On; Connecting The Top To The Subwoofer - dB Technologies Entertainment System Série Mode D'emploi

English

3. FIRST SWITCH-ON

CONNECTING THE TOP TO THE SUBWOOFER

After mounting the top on the pole as described in the
relative paragraph, you must connect it to the subwoofer:
• Make sure that the top is inserted onto the telescopic
pole previously mounted
• Use the 2.5
• Connect the bottom connector on the top as shown
• Connect it to the TOP OUTPUT connector [9] on the sub
• Use the clips
the cable to
ES-1002
on the subwoofer
m cable provided.
provided to secure
the telescopic pole
Cod. 420120265 REV. 1.0
31