Troubleshooting - dB Technologies Entertainment System Série Mode D'emploi

5. TROUBLESHOOTING

The system will not turn on:
1. Check that the system is connected to a working power supply.
2. Check that the power cable with VDE connector is plugged in properly and that the power switch is in
the ON position.
The diffuser turns on but does not emit any sound:
1. Check that the audio signal input is connected correctly.
2. Check that the cables used are not damaged.
3. Check the connections between the top and the subwoofer.
4. Check that the mixer or audio source is on and clearly shows an output signal.
5. Check that the input level, input type and output level are suitable.
The sound emitted by the diffuser is insufficient or distorted:
1. Check that the cables used are not damaged. If they are, replace them ( a damaged cable may cause
signal loss or alteration).
2. Check that the input level, input type and output level are suitable.
ES-1002
36
English
Cod. 420120265 REV. 1.0