Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Manuale utente
The
heat
pump
There is no electricity;
does not work
The
correctly inserted in
the socket.
The
compressor
The set safety period
and/or the fan do
of
not work
finished;
The
temperature has been
reached.
The
heat
pump
Wrong
continuously
of
switches
itself
on
parameters/setpoint
and off
and/or
values.
The
heat
pump
Wrong
remains
of the parameters/set
continuously
point and/or hysteresis
switched on
and
values.
does not switch off
The electric heating
Your intervention is not
element does not
required
switch on
WARNING!
In
operator does not succeed in solving
the problem, switch off the equipment
and
seek
specifying
purchased.
6
DISPOSAL
At the end of their device lifecycle, the heat
pumps will be disposed of in conformity with the
applicable regulations.
WARNING! This equipment contains
greenhouse fluorinated gas included in
the Kyoto protocol. The maintenance
and disposal operations must only be
carried out by qualified personnel.
INFORMATION TO USERS
Pursuant to EU Directives 2002/95, 2002/96 and
2003/108, relating to the reduction of the use of
hazardous substances in electric and electronic
equipment as well as waste disposal ".
The symbol of the barred wheelie-
bin that can be seen either on the
equipment
indicates that the device must be
collected separately from other
waste at the end of its lifecycle.
At the end of the device lifecycle, the user must
therefore take the equipment to suitable separate
plug
is
not
time
has
not
scheduled
programming
the
hysteresis
programming
the
event
that
the
technical
assistance
the
device
model
or
its
packaging
collection centres for electronic and electro-
technical waste, or to return it to the dealer upon
purchasing another equivalent device, at the ratio
of one to one.
The adequate separate waste collection relating
to the subsequent sending of the discontinued
equipmentfor
recycling,
environmentally-compatible disposal, contributes
towards avoiding possible negative effects on
both
the
environment
encourages
the
reuse
materials of which the equipment is made.
The unlawful disposalof the device by the user
leads to the application of the administrative
penalties foreseen by applicable legislation.
The main materials that are used in the production
of the equipment are as follows:
Steel;
Magnesium;
Plastic;
Copper;
Aluminium;
Polyurethane.
7
Safety regulation
7.1
GENERAL CONSIDERATIONS
The machine has been designed to reduce risks to
persons and to the environment in which it is
installed, to the minimum. To eliminate residual
hazards, it is therefore advisable to become as
familiar as possible with the machine in order to
avoid accidents that could cause injuries to
persons and/or damage to the machine.
Consult the technical safety briefs available from
coolant manufacturers for further information
about the characteristics of the cooling fluid.
7.1
Information on coolant used
This device contains fluorinated greenhouse gas
included in the Kyoto protocol. Do not discard
such gas into the environment.
Coolant type: HFC-R134a.
N.B.:
Maintenance
operations must be carried out only by
qualified personnel.
treatment
and/or
and
health;
it
also
and/or
recycling
of
and
disposal
pag. 14 / 14
Publicité
Chapitres
Table des Matières
Dépannage
