Ferroli AQUA1 PLUS Manuel D'utilisation page 23

Manuale utente
Make sure that the keyboard is not locked
and that no other advanced procedure is in
progress;
Press and release the
show the first code available;
Press and release either the
until "rtC" is shown;
The day is displayed
corresponding to Monday).
To change the day of the week:
Press and release the
show "dd" followed by the two numbers
representing the day;
Press and release either the
within 15 seconds.
To change the time:
Press and release the
the day of the month: the display will show
"hh" followed by
representing the time (Time is shown in the 24
hr. format);
Press and release either the
within 15 seconds.
To change the minutes:
Press and release the
the time: the display will show "nn" followed by
the two numbers representing the minutes;
Press and release either the
within 15 seconds;
Press and release the
out any operations for 15 seconds;
To exit the procedure:
Press and release the
shows the temperature
parameter P5 or do not carry out any
operations for 60 seconds.
Alternatively:
Press and release the
To set operations within timeslots, it is
necessary to have carried out the settings
relating to the day and the real time
beforehand.
3.1.3.9 Timeslot settings for the switching
on/off of the equipment
N.B.: before
timeslot settings, set day and real time
key: the display will
or the key
as 1...7 (number 1
key: the display will
or the key
key while changing
the two numbers
or the key
key while changing
or the key
key or do not carry
key until the display
established by
key.
proceeding with the
To start the procedure:
Make sure that the keyboard is not blocked
and that no other advanced procedure is in
progress;
Press and release the
shown on the display.
To set the first timeslot:
Press and release either the
within 15 seconds to select "HOn1" (first
switching on time)
switching off time); select "HOn2" and "HOF2"
for the second switching on/off time;
Press and release the
Press and release either the
and within 15 seconds;
Press and release the
out any other operations for 15 seconds.
To associate a time slot to a certain day of the
week:
After the previous procedure has been carried
out, press either the
then let it go within 15 seconds in order to
select "Hd1" (switch on time for day 1, or
rather Monday) and/or "Hd2...7" (switching on
time for days 2-7, or rather Tuesday-Sunday);
Press and release the
Press and release either the
within 15 seconds in order to select "1" (the first
switch on/off time) or "2" (the second switch
on/off time);
Press and release the
out any other operations for 15 seconds.
To exit the procedure before its completion:
Do not carry out any operations for 15 seconds
(any changes will be saved) or press the
key and then let it go.
Carefully evaluate enabling of time slot
operation in order to avoid malfunctions
caused by users.
3.1.3.10 Display of the operating status
Make sure that the keyboard is not locked and
that no other advanced procedure is in
progress;
Press and release
Auto/ECO/Obst/Anti will be displayed for 3
seconds depending on the current active
operative status.
3.1.3.11 Silencing of the alarm sound
key: "SP1" will be
or the key
and/or "HOf1" (first
key;
or the key
key or do not carry
or the key and
key;
or the key
key or do not carry
the key:
pag. 8 / 14