Know Your Product; Description, Specifications And Instructions - Haussmann TDB340 Manuel D'utilisation

KNOW YOUR PRODUCT

???
5
12 3
7
1. On/off trigger switch
2. Lock-off button
3. Depth adjustment knob
4. Main handle
5. Auxiliary handle
6. Dust/chip extraction port (x 2)
7. Parallel fence attachment knob
8. Dust/chip extraction guide switch
9. Reversible blades
10.Blade barrel
11.Clamping screw
12.Movable front base
13.Fixed rear base
14.Parallel fence guide
15.Shavings adaptor tube
GB
16.Shavings collection bag
16
17.Spanner
12
1 2 4
8 6 13
14
17
11
9
10
??? DESCRIPTION, SPECIFICATIONS
??? AND INSTRUCTIONS
Description of symbols
15
The rating plate on your tool may show
symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for
additional protection.
Tool is listed by Underwriters
Laboratories, and listed to
Canadian Standards by
Underwriters Laboratories.
Specifications
Voltage: 120V ~ 60Hz
Power rating: 6 Amp
No-load speed: 16000 RPM
Max Cut Depth: 1/8"
Planing Width: 3-1/4"
Insulation: Double Insulated
Weight: 3 kg (6.6 lbs)
V: volts Amp : ampere
Hz: hertz ~ : alternating current
This planer is double insulated. There are two
independent barriers of insulation to protect you
from the possibility of electric shock.
General safety instructions
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS.
WORK AREA
• Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
• Keep bystanders, children, and visitors
away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do
not change the plug in any way. Double
Insulated eliminates the need for the three
wire grounded power cord and grounded
power supply system.
• Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is grounded.
• Don't expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord
to carry the tools or pull the plug from
an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace
damaged cords immediately.
Damaged cords increase the risk of
electric shock.
• When operating a power tool outside,
use an outdoor extension cord marked
"W-A" or "W". These cords are rated for
outdoor use and reduce the risk of electric
shock.PERSONAL SAFETY
• Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating power tools may result in serious
13
GB