Numark C3 Guide D'utilisation Rapide page 3

INTRODUCTION
Welcome to the C3 – a professional 19", 5-channel rack mixer. Here are a few of the features you'll come to love about this
device:
5 channels plus DJ mic control with EQ
10 line, 3 phono, and 3 mic inputs
Master balanced XLR outputs with Record and Zone outputs
Steep 3-band EQ on every channel
Split or blend cueing, plus PFL gain adjust with meter
Fader start capability
Panning for master output
Replaceable assignable crossfader
We hope that the C3 serves you well for many years to come.
Sincerely,
The People of Numark
BOX CONTENTS
C3
IEC Power Cable
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your C3. Registering your product ensures that we can keep you up-to-date
with any last-minute product developments and provide you with world-class technical support, should you run into any
problems.
GROUND RULES
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
•
Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by:
•
Turning off amplifiers
•
Mixer
•
Last, any input devices
3