Technical Data; Product Features - BRICK MPV2200-75 Traduction Des Instructions D'origine

Maintain power tools. Check for misalignment or
jammed moving parts, breakages or any other
feature that might affect the operation of the power
tool. If it is damaged, the power tool must be
repaired. Many accidents are caused by using
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
In this manual and/or on the machine the following
symbols are used:
Read manual before use.
Wear eye protection.
Always wear a dust mask.
In accordance with essential
applicable safety standards
of European directives
suffocation!
Warning / Danger!
Wear ear protection.
Double insulated
Hammer Safety Warnings
Wear ear protectors. Exposure to noise can
cause hearing loss.
Hold power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden wiring
or its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Use suitable detectors to determine if utility
lines are hidden in the work area or call the local
utility company for assistance. Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or
may cause an electric shock.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.

Technical Data

Rated power input
Output power
Impact rate
Impact energy per stroke 75 J
Tool holder
Weight
Protection class

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Handles
3 Tool retainer
4 Tool holder
5 Tool shank
2200 W
220-240 V~ 50Hz
950 tr/min
28X530 mm
32 kg
II
15