Accessories - Milwaukee 6190-20 Manuel De L'utilisateur

MAINTENANCE
To reduce the risk of injury, always unplug your tool before
performing any maintenance. Never disassemble the tool or
try to do any rewiring on the tool's electrical system. Contact
a MILWAUKEE service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance pro-
gram. Before use, examine the general condition of your tool. Inspect
guards, switches, tool cord set and extension cord for damage. Check
for loose screws, misalignment, binding of moving parts, improper mount-
ing, broken parts and any other condition that may affect its safe opera-
tion. If abnormal noise or vibration occurs, turn the tool off immediately
and have the problem corrected before further use. Do not use a dam-
aged tool. Tag damaged tools "DO NOT USE" until repaired
(see "Repairs").
Under normal conditions, relubrication is not necessary until the motor
brushes need to be replaced. After six months to one year, depending on
use, return your tool to the nearest MILWAUKEE service facility for the
following:
• Lubrication
• Brush inspection and replacement
• Mechanical inspection and cleaning (gears, spindles, bearings,
housing, etc.)
• Electrical inspection (switch, cord, armature, etc.)
• Testing to assure proper mechanical and electrical operation
To reduce the risk of injury, electric shock and damage to the
tool, never immerse your tool in liquid or allow a liquid to flow
inside the tool.
Cleaning
Clean dust and debris from vents. Keep the tool handles clean, dry and
free of oil or grease. Use only mild soap and a damp cloth to clean your
tool since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia. Never use flammable or
combustible solvents around tools.
Repairs
If your tool is damaged, return the entire tool to the nearest service
center.

ACCESSORIES

To reduce the risk of injury, always unplug the tool before
attaching or removing accessories. Use only specifically
recommended accessories. Others may be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric
Tool catalog or go on-line to www.milwaukeetool.com. To obtain a
catalog, contact your local distributor or a service center.
page 8
WARNING
WARNING
WARNING
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is
warranted to the original purchaser only to be free from defects in
material and workmanship. Subject to certain exceptions, MILWAUKEE
will repair or replace any part on a electric power tool which, after
examination, is determined by MILWAUKEE to be defective in material or
workmanship for a period of five (5) years* after the date of purchase.
Return the electric power tool and a copy of proof of purchase to a
MILWAUKEE factory Service/Sales Support Branch location or MIL-
WAUKEE Authorized Service Station, freight prepaid and insured, are
requested for this warranty to be effective. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs made
or attempted by anyone other than MILWAUKEE authorized personnel,
misuse, alterations, abuse, normal wear and tear, lack of maintenance,
or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain
hoists), all Ni-CD battery packs, Work Lights (cordless flashlights), Job
Site Radios, and Trade Titan™ Industrial Work Carts is one (1) year from
the date of purchase. *The warranty period for Li-Ion battery packs that
do not contain V™-technology – 4.0 volts through 18.0 volts - is two (2)
years from the date of purchase.
*There is a separate warranty for V™-technology Li-Ion Battery Packs
V™18 volts and above that accompany V™-technology cordless power
tools:
*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above
is covered by an initial 1000 Charges/2 Years free replacement war-
ranty. This means that for the earlier of the first 1000 charges or two (2)
years from the date of purchase/first charge, a replacement battery will
be provided to the customer for any defective battery free of charge.
Thereafter, customers will also receive an additional warranty on a pro
rata basis up to the earlier of the first 2000 charges or five (5) Years
from the date of purchase/first charge. This means that every customer
gets an additional 1000 charges or three (3) years of pro rata warranty
on the V™-technology Li-Ion Battery Pack 18 volts or above depending
upon the amount of use. During this additional warranty period, the
customer pays for only the useable service received over and above
the first 1000 Charges/2 years, based on the date of first charge and
number of charges found on the battery pack via Milwaukee's V™-
technology Service Reader.
Warranty Registration is not necessary to obtain the applicable war-
ranty on a MILWAUKEE product. However, proof of purchase in the
form of a sales receipt or other information deemed sufficient by MIL-
WAUKEE, is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REM-
EDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE
PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE
TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN
NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPE-
CIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS,
ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS
A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN
ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR
LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EX-
PRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE
FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE,
AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico
only.