Vileda PureClean S5 Manuel D'utilisation page 10

2 Assembly
Unpack all parts from the box (see 'Product overview' on page 3).
Remove the protective film and cardboard packaging.
Insert the handle with the shaft into the top of the device housing.
When the handle is correctly engaged, you will hear a "click" (Fig.
The handle can be released from the main unit by inserting a tool (e.g. a screwdriver) into the
opening at the back of the main unit and simultaneously pulling the handle upwards with force
(as shown in „7 Disassembly" on page 19).
3 Charging
WARNING!
Risk of injury due to electric current!
Only charge the device with the supplied adaptor (model
Place the charging base on a horizontal surface.
Connect the adaptor to the charging base and to the socket (Fig.
Place the main unit on the charging base (Fig.
The voice prompts "start charging", indicating that charging mode has started.
Fully charge (100%) the device prior to first use.
As soon as 100% appears on the display (Fig.
If the battery is empty, charging time is about 3 hours.
After a full charge and 1 minute of inactivity, the device will go to sleep.
When the product has been running continuously for an extended period of time, the device
will cool down before charging in order to prolong battery life. Cooling time is about 1 hour.
Charge the battery at least once every three months to avoid damage due to deep discharge.
10
).
1
CZH024310080EUWQ
).
2
).
2
), charging is finished.
2
).
www.vileda.com