Filling Clean Water Tank; Charging Instructions - Tineco FLOOR ONE S5 COMBO Série Mode D'emploi

Filling Clean Water Tank

Press the Clean Water Tank release button to
remove it from the appliance.
Place the tank back into the appliance. You
should hear a "Click" if done correctly.

Charging Instructions

Warning:
• Only charge the appliance with the adaptor supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for
optimal performance.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
Open the tank cap, and fill with tap water to
the Max line. When deep cleaning is necessary,
add one bottle cap of solution to the CWT and
tightly close the cap.
Note:
Only use water under 140°F/60°C.
②
DO NOT USE HOT WATER.
①
To charge the appliance, place the appliance on the charging
base and plug the adaptor into a power outlet.
1. Connect the external charging cord to the charging base
and plug it into the wall outlet.
2. To avoid tripping hazards, please place the appliance on the
charging base near a wall during charging.
11
MAX