Product Overview; Before Fi Rst Use; Setting Up The Device - DS Produkte HY-201 Mode D'emploi

Product Overview

4
3
2
1 Latch
2 Bottom grill plate
3 Top grill plate
Before fi rst use
1. Remove all packaging material and any protective fi lm used to secure it during trans-
port. Never remove the type plate or any warnings.
2. The device may have production residues stuck to it. To prevent health risks, clean
the device thoroughly before its fi rst use and then heat up for a couple of minutes.
Follow the instructions in the chapters "Cleaning and storage", "Setting up the device"
and "Usage".
During initial startup, production-related additives (e. g. grease) can lead to slight
smoke and / or odour development. This is normal and not a defect of the device.
3. Clean the device again.

Setting up the device

PLEASE NOTE!
■ Do not put the device under kitchen cabinets or similar. These may be damaged due
to rising steam!
■ The surfaces of furniture may contain components that can damage and soften the
feet of the device. If necessary, place a suitable base under the feet.
■ The device may only be operated in a horizontal position, never on its side or stand-
ing upright.
Place the closed device with a free space to the sides (at least 20 cm) and above (at
least 30 cm) on a fl at, fi rm, heat-resistant surface that is not sensitive to grease splashes.
15
1
4 Handle
5 Heat indicator light
6 Operating light
5 6
EN