Rehau EVERLOC+ Manuel D'instruction page 8

11. Press the operating trigger for expansion or compression. The power tool
is designed for one-handed operation. Wrap your fingers tightly around the
control handle as shown below and keep a secure grasp on the tool during
work.
WARNING
Improper handling of the power tool can increase the risk of pinch or crush
injury. The tool is designed for one-handed operation and there are no
gripping surfaces outside of the control handle. To reduce the risk of serious
personal injury:
- Wrap your fingers tightly around the control handle as shown in this manual
and keep a secure grasp on the tool during work.
- Use only your index finger to trigger the tool. Using other fingers to trigger
the tool may cause you to lose control of the power tool or increase risk of
personal injury, including pinch injuries.
- Keep hands away from the expander head, hydraulic slide and compres-
sion jaws during operation
12. To expand RAUPEX pipe, fully insert expander head into the end of the
pipe. Expand the pipe twice, ensuring the expander head is rotated 1/2 of
one expander head segment between expansions.
8
13. To compress EVERLOC+ sleeve, the black compression jaw must be
placed on the fitting and the silver jaw must be placed behind the sleeve. It
may be necessary to control the pipe during installation. Be sure to keep
your hands and fingers clear of the moving parts.
14. To release the hydraulic pressure and return the tool to its starting
position, press the release button.
WARNING
In the event of a pinch or unintended compression, release the hydraulic
pressure with the release button.
15. Always return the tool to the starting position and remove the battery
before installing/removing the expansion adapter or expander head.
WARNING
To reduce the risk of personal injury from accidental activation of the
power tool, always remove the battery pack before changing or adjusting
the expander head or compression jaws, and before performing any other
type of inspection, maintenance or cleaning