Rehau EVERLOC+ Manuel D'instruction page 7

4. Lock expander head into position. Make certain expander head secures
with an audible click.
5. Slide the compression jaws into the compression slots.
6. If necessary, the tool head can be rotated to make installation easier.
The collar rotates with the tool head. Have a missing or damaged collar
reparied or replaced before use.
WARNING
To reduce the risk of crush or cut injury, remove index finger from trigger
before rotating the tool head.
7. If necessary, the compression jaws can be mounted on the side of the
tool to make it easier to compress the fitting assembly.
8. If necessary, swap and flip the compression jaws to make it easier to
compress the fitting assembly.
9. If necessary, remove the expansion adapter to make it easier to
compress the fitting assembly. Press the release lever and slide the
adapter off the expansion slot to remove.
10. To insert battery, push it completely into the foot of the tool housing
until it locks into position
NOTICE
For use only with DEWALT battery DCB127.
7