Klauke mini EK 15/50G Mode D'emploi page 35

Masquer les pouces Voir aussi pour mini EK 15/50G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instruction manual EK15/50, EK15/50G, EK35/4
__________________________________________________________________________________________________________________
As soon as the speed of the machine decreases noticeably the battery must be recharged. Do not
recharge a partially discharged battery as a precaution.
Charge the battery at room temperature between 10°C and 40°C. If charging a battery which
has currently been used or which was laying in the sun for a longer period of time (T>65°C) the
right LED might flash red. In this case remove battery out of charger and wait for a while. The
charging procedure can be re-started after the battery cooled down. Charging batteries at low
temperatures under 5°C is not possible. Increase battery temperature before starting the
charging cycle. Do not expose the charging unit to rain and snow. Do not charge a battery in
the vicinity of explosive materials and gases.
No other batteries e.g. dry batteries or car batteries etc. are permitted to be used neither in the
tool nor in the charging unit. The charging unit also allows to charge the Klauke batteries RA1,
RA2 and RA3.
Do not use the cord to transport the charging unit or to pull the plug out of a wall socket with
force. Do not insert strange parts into the ducts of the charging unit. Pull the plug of the
charging unit after charging. Do not disassemble the charging unit or battery.
The charging of the batteries must only be made with generic chargers. The mini battery can be
charged with all Klauke chargers.
Attention
Do not place the battery in your pocket or in your toolbox if there are any
conductive materials in it such as coins, keys, tools or other metallic parts.
Instruction manual EK15/50, EK15/50G, EK35/4
__________________________________________________________________________________________________________________
As soon as the speed of the machine decreases noticeably the battery must be recharged. Do not
recharge a partially discharged battery as a precaution.
Charge the battery at room temperature between 10°C and 40°C. If charging a battery which
has currently been used or which was laying in the sun for a longer period of time (T>65°C) the
right LED might flash red. In this case remove battery out of charger and wait for a while. The
charging procedure can be re-started after the battery cooled down. Charging batteries at low
temperatures under 5°C is not possible. Increase battery temperature before starting the
charging cycle. Do not expose the charging unit to rain and snow. Do not charge a battery in
the vicinity of explosive materials and gases.
No other batteries e.g. dry batteries or car batteries etc. are permitted to be used neither in the
tool nor in the charging unit. The charging unit also allows to charge the Klauke batteries RA1,
RA2 and RA3.
Do not use the cord to transport the charging unit or to pull the plug out of a wall socket with
force. Do not insert strange parts into the ducts of the charging unit. Pull the plug of the
charging unit after charging. Do not disassemble the charging unit or battery.
The charging of the batteries must only be made with generic chargers. The mini battery can be
charged with all Klauke chargers.
Attention
Do not place the battery in your pocket or in your toolbox if there are any
conductive materials in it such as coins, keys, tools or other metallic parts.
page 35
page 35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mini ek 35/4Mini ek 15/50MiniEk 15/50gEk 35/4Ek 15/50

Table des Matières