Protection Function; Installation And Adjustment - Tecnolux JC09CA16B1R290 Mode D'emploi

IV. Protection function
1. Frost Protection Function:
In cooling mode, if the temperature of the exhaust pipe is too
low, the machine will automatically enter protection status; if the
temperature of the exhaust pipe rises to a certain temperature, it
can automatically revert to normal operation.
2. Overflow Protection Function:
When water in the water pan exceeds the warning level, the
machine will automatically sound an alarm, and the "FULL"
indicator light will flash. At this point, you need to move the
drainage pipe connecting the machine or the water outlet to
sewer or other drainage area to empty the water (details see
Drainage Instructions at the end of this chapter). After the water
is emptied, the machine will automatically return to the original
state.
3. Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute
delay booting protection function after the compressor is turned
off.
V. Installation and adjustment
1. Installation :
Warning: before using the mobile air conditioning, keep it
upright for at least 48 hours.
The air conditioning can be easily moved in the room. In the
moving process, ensure that the air conditioning is in the upright
position and the air conditioning should be placed on a flat
surface. Do not install and use the air conditioning in the
bathroom or other humid
1.1. Install the heat pipe assembly (as shown below）