Check that:
power is being supplied to the machine
the automatic switch of the mains power system has not been switched off
the plug is in perfect working order and is correctly inserted into the socket
the socket is in perfect working order. To check this, plug in an appliance that you know to
work
the power cable is not interrupted.
Check that:
the ice maker is properly level
the ice maker is not in contact with any units that can cause it to vibrate
the cooling circuit pipes at the machine rear have no contact points and that they do not
vibrate against the machine.
Check that:
the door closure is airtight
the ice maker is not close to sources of heat
the ice maker is properly ventilated
the condenser is not blocked by dust
the fan can rotate freely
Check that:
the refrigerating system is operating correctly
there is water in the grid assembly (J);
there is sufficient water in the tank or that the water mains is operating correctly
the internal temperature of the ICE MAKER is ≤ -15°C
the ice-level sensor (C) is in the position indicated in Fig. 1
if water is present in the grid assembly, make sure that the cooling system is operating
correctly (L).
Check that:
ice is present in the grid assembly.
If this is the case, reset the appliance by switching it off for 4-5 hours.
18