Add Fence Fabric; Stretch The Fabric - Petsafe Do-It-Yourself Dog Run Instructions De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Step

Add Fence Fabric

6
1. Gather 5 clips, 1 tension rod, package of tie wires, and one roll of chain link fabric. Note: Putting on the fabric
is easy, except chain link fabric is strong and stiff and the roll is heavy, so a helper is recommended.
2. Start at a post next to the gate. Slip the tension rod down through the fi rst diamonds of the fabric (6B).
3. Connect the fabric to the gatepost by clipping the tension rod to the post (6C). Secure all 5 clips.
4. Unroll the fabric around two sides of the Dog Run. Loosely add a tie wire to the top frame about every
1.5 m to keep the fabric from falling down (6A).
__________________________________________________________________________________________________

Stretch the Fabric

Step
7
1. Starting from the fi rst post away from the gate, use a hammer to stretch
the fabric (7A).
2. Stretch fabric as tightly as possible. Add tie wires to posts to hold the
stretched fabric.
Important: Be sure all tie wires are on the same picket (wire) or
the fabric will be crooked.
3. Using a hammer, stretch the fence past the next post, until you reach the
corner post. Don't tie off at this corner post.
6A
www.petsafe.net
6B
6C
7A
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Do-it-yourself

Table des Matières