HBM PW27P Série Notice De Montage page 10

10
Dimensions in mm (1 mm = 0.03937 inches)
Load application/
platform center
Installation: 2 x M6
tightening torque 10 Nm
max. thread reach 14 mm
Fig. 3.1: Load application and installation
Important
Load must not be applied to the side where the cable connection is located,
as this would cause a force shunt.
HBM
2 O‐ring seals
(in scope of
supply)
130
Installation: 2 x M6
tightening torque 10 Nm
max. thread reach 14 mm
14
Connector plug
Optional centering:
2 centering bores on
both sides, on the face
PW27P

30
4.090.02
270.02
A3631-1.0 en/de/fr