Kohler Sterling 7114 Série Guide D'installation Et D'entretien page 17

3.
Install the Rough Plumbing
7114, 7124, 7115 Series
with "Through the Floor" Drain
Séries 7114, 7124, 7115
avec drain "A travers le sol"
Serie 7114, 7124, 7115
con desagüe "a través del piso"
Shower Elbow/Coude de douche/Codo de ducha
77"
(195.6 cm)
Min/Min/Mín
A
B
Series
7114 and 7124
A 15-1/4" (38.7 cm)
10" (25.4 cm)
B
NOTE: Provide access to all plumbing connections to simplify future maintenance.
Include access at the back of the plumbing wall whenever possible.
NOTE: The dimension shown for the shower elbow is a recommended height.
NOTE: The plumbing end wall cannot be installed with the spout pipe in place. Use
of an elbow fitting is recommended. Once the plumbing end wall is installed, the
spout pipe can be threaded or sweated into the elbow. Choose the appropriate elbow
fitting for your application based on your access needs. See illustration.
NOTE: To meet ADA requirements, install the piping as recommended in the
roughing-in illustration. For baths with wall surrounds, ensure that the planned valve
location will not interfere with the plumbing end wall structure.
Install the water supply pipes according to the faucet manufacturer's instructions.
Cap the supplies and check for leaks.
Strap the supply lines to the stud framing.
Install the shower valving according to the manufacturer's instructions. Do not
install the trim at this time.
Sterling
7114, 7124, 7115 Series
with "Above the Floor" Drain
Séries 7114, 7124, 7115
avec drain "Au-dessus du sol"
Serie 7114, 7124, 7115
con desagüe "arriba del nivel del piso"
Blocking
Arrêt
Bloque
Supply Valves
Valves d'alimentation
Válvulas de suministro
Blocking/Arrêt/Bloque
Spout Elbow
Coude du bec
Codo del surtidor
25" (63.5 cm)
Min/Min/Mín
7115
16-1/4" (41.3 cm)
9-1/4" (23.5 cm)
17
78"
(198.1 cm)
Min/Min/Mín
25" (63.5 cm)
Min/Min/Mín
1065823-2-D