Listening To An Usb Memory Device; On-Screen Menu - Teac DR-H338i Mode D'emploi

MP3 WMA JPEG DIVX

Listening to an USB Memory Device

For about USB memory device compatibility, see page 8.
1
Press the SOURCE button to select "USB Source".
2
Plug your USB memory device into the USB connector.
It takes a few seconds for the unit to load the USB memory
device. Some files may automatically start playback.
1
< You can reverse steps and
< Only USB flash memory can be used. Do NOT use a high-
capacity USB hard disc with this unit.
3
Press the Play/Pause button ( y / J ) to start playback if
playback has not started automatically.
26
2
.
DVD VCD MP3 WMA JPEG

On-screen Menu (1)

An on-screen menu is shown when a DVD or video CD with playback
control (PBC) content is loaded.
The way in which the menu works may differ according to disc.
DVD menus
Use the Cursor buttons (5/b/t/g) to select the menu item from
a DVD, and confirm the selection using the Enter button.
Returning to the menu screen
Press either the MENU button or the TITLE button.
< Depending on the disc, pressing the MENU button during playback
may restart playback from the first chapter.
< This function is not available with a DVD-RW disc with VR content.