Listening To A Disc - Teac DR-H338i Mode D'emploi

DVD VCD CD MP3 WMA JPEG DIVX
1
Press the SOURCE button to select "DISC Source".
< When no disc is loaded in the disc tray, "NO DISC" is displayed.
2
Press the Open/Close button ( L ) to open the tray.
3
Insert the disc label side up.
< In the case of double-sided discs, the side to be played should
be face down.
< Make sure the disc is centered in the tray in order to avoid any
malfunction or jamming of the tray or damage to the disc.

Listening to a Disc

4
Press the Open/Close button ( L ) again to close the tray.
The tray will close. Take care that you do not catch your fingers
in the tray.
It takes a few seconds for the unit to load the disc.
< Some discs may automatically start playback.
5
Press the Play/Pause button ( y / J ) to start playback if
playback has not started automatically.
If a menu is shown on screen (some DVD or video discs may
show such a menu), see "On-screen menu" on the next page.
25