Mounting Of The Retaining Bracket; Mounting The Motion Detector Case - FEIG Electronic MWD BP-C Mode D'emploi

5.2 Mounting of the retaining bracket

The retaining bracket is suitable for wall and ceiling mounting.

5.3 Mounting the motion detector case

Fig. 2: Fixing bolt and angle spacing
FEIG ELECTRONIC GmbH
Manual
Fig. 1: Retaining bracket
After mounting the retaining bracket, the motion
detector case must be fixed at the installation
angle with the enclosed bolts.

the case of the motion detector helps with precise
alignment of the device. The maximum angle is
180°.
Page 32 of 103
The angle scale, in 15° divisions, marked on
MWD BP_Handbuch_mehrsprachig_12.doc
MWD BP