Connection Cable - Electrolux EHH3920BOK Notice D'utilisation

Model .......................................
PNC .........................................
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.

8.3 Connection cable

• The hob is supplied with a connection
cable.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05V2V2-F T min 90°C.
Speak to your local Service Centre.
8.5 Assembly
8.4 Installation of more than
one hob
min. 650 mm
If several 30 cm hobs are to be installed
side by side into the same cut out, an
assembly kit including a support side
bracket and supplementary seals is
available at our Authorised Service
Centres. The relevant installation
instructions are supplied within the kit
package.
min. 2 mm
A
< 20 mm
min. 250 mm
A B
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
ENGLISH 11
490 mm
270 mm
B
min
30 mm