LENCO SCD-430RD Mode D'emploi page 18

RADIO SECTION
Receiving Band:
Tuning Range:
Antenna:
GENERAL
Output Power:
Aux in jack:
Power Source:
Power Consumption:
Power Consumption
(Standby):
CASSETTE SECTION
Biasing System
Frequency Response
Wow and Flutter
Note: Specifications are subject to change for continuous
improvement without prior notice.
Disclaimer
Updates to Firmware and/or hardware components are made
regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your particular
situation. All items described in this guide for illustration purposes
only and may not apply to particular situation. No legal right or
entitlements may be obtained from the description made in this
manual.
AM/FM
AM: 540 - 1600 KHz
FM: 87.5 - 108 MHz
FM rod antenna, AM built-in ferrite bar
(YOUR EXACT TUNING RANGE CAN BE
CHECKED FROM BACK PLATE OF UNIT)
1.5W x 2 (MAX)
3.5mm
AC 230V ~ 50Hz
DC 9V 1.5V UM-1/D x 6pcs
(YOUR EXACT AC POWER CAN BE
CHECKED ON THE BACK PLATE OF UNIT)
15 W
<0.5W
DC Bias
125 – 6.3 KHz
0.35 % WRMS (JIS)