LENCO SCD-430RD Mode D'emploi page 11

DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-1/D size
batteries (not included) into compartment. Please follow correct
polarities as indicated.
CAUTION
⚫ Remove batteries if they are flat or not being used for a long
period of time.
⚫ Batteries contain chemical substances, so they should be disposed
of properly.
BASIC FUNCTION
SWITCHING ON THE UNIT
Set the FUNCTION switch to CD/MP3/AUX or RADIO.
⚫
In CD/MP3/AUX position, when the unit is not providing the main
⚫
function for 15 minutes, the unit will automatically switch into
standby mode. Press the PLAY/PAUSE/
unit again.
REMARK:
Please note that low volume setting in the audio source may be
⚫
recognized as "no audio signal", this will affect the capability of
signal detection from the device and can also originate an
automatic switch into standby mode. If this happens please
reactivate the audio signal transmission or increase the volume
setting on the audio source player in order to resume playback.
Electrostatic Discharge hints – The unit may reset or may not reset
⚫
to normal operation mode due to electrostatic discharge, just
switch it off and reconnect again.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL back and forth to increase and
decrease volume.
button to turn on the