Hands-Free Function - Hama TUBE Mode D'emploi

4.7 Hands-free function

You can use the speaker as a hands-free set
for your mobile phone. For this function,
the mobile phone must be connected to the
speaker via Bluetooth
• Press the Play/Pause/Mode button > (4)
once to answer an incoming call.
• Press and hold the Play/Pause/Mode button
> (4) for about 3 seconds to reject an
incoming call.
• If you would like to end a call, press the
Play/Pause/Mode button > (4) once
during the call.
Note – Call quality
To increase the call quality, make sure that
you are near the speaker with your mobile
phone during the call.
5. Care and Maintenance
Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
.
®
7. Service and Support
Please contact Hama Product Consulting if you
have any questions about this product.
Hotline: <<49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
8. Service and Support
Mobile Bluetooth
Bluetooth
®
Technology
Supported pro les
Frequency
Range
Max. music output
Charging voltage
Sound System
Impedanc
Speaker Tube
®
Bluetooth
v5.0
®
A2DP V1.2; AVRCP
V1.4; HFP V1.5
180 Hz – 20 kHz
< 10 m
3 W
Max. 5V 500 mA
Mono
4
7