Samsung SC-MX10 Guide D'utilisation page 94

Table des Matières

Publicité

troubleshooting
Symptom
When the screen
is exposed to the
direct sunlight during
This is not malfunctioning.
recording, the screen
becomes red or black
for an instant.
During recording, the
"Date/Time" is set to "Off". Set the
date/time does not
"Date/Time" to "On". ➥page 64
display.
There is a time
difference between
On your camcorder, there may be a slight
the point where you
time delay between the point when you
press Recording
press Recording start/stop button and the
start/stop button
actual point where the recorded movie
and the point where
starts/stops. This is not an error.
the recorded movie
starts/stops.
The internal temperature of your
camcorder is unusually high. Turn off your
camcorder and leave it for a while in a
cool place.
The recording stops.
Your camcorder is damp and moist inside
(condensation). Turn off your camcorder
and leave it for about 1 hour in a cool
place. ➥page 79
88_English
Explanation/Solution
dépannage
Problème
Lorsque l'écran est
exposé à la lumière
directe du soleil pen-
dant l'enregistrement,
Il ne s'agit pas d'un dysfonctionnement.
l'écran devient rouge
ou noir pendant un
instant.
La fonction "Date/Time"(Date/Hr) est
Pendant
défi nie sur "Off"(Off). Réglez la fonction
l'enregistrement, la date/
"Date/Time"(Date/Hr) sur "On"(On).
heure n'apparaît pas.
➥page 64
Il existe une dif-
férence de temps
Sur votre caméscope, il peut y avoir un
entre le point où
petit retard entre le point lorsque vous
vous appuyez sur le
appuyez sur le bouton d'enregistrement
bouton d'enregistre-
Start/Stop et le véritable point où le fi lm
ment start/stop et
enregistré commence/s'arrête. Il ne s'agit
celui sur lequel le
pas ici d'une erreur.
fi lm enregistré com-
mence/s'arrête.
La température interne de votre
caméscope est exceptionnellement
élevée. Eteignez-le et laissez-le de côté
L'enregistrement s'
un instant dans un endroit froid.
Votre caméscope est humide ou moite
arrête.
à l'intérieur (condensation). Eteignez-
le et laissez-le de côté pendant 1 heure
environ dans un endroit froid. ➥page 79
Explication et/ou solution
French_88

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc-mx10pSc-mx10aSc-mx10au

Table des Matières