Samsung SC-MX10 Guide D'utilisation page 93

Table des Matières

Publicité

Recording
Symptom
Press the MODE button to set Movie
Record mode (
There is not enough free space to record
on the built-in memory or memory card.
Check if the memory card is write-
protected or if SDHC memory card is
Pressing the
inserted.
Recording start/
The internal temperature of your
stop button does not
camcorder is unusually high. Turn off your
start recording.
camcorder and leave it for a while in a
cool place.
Your camcorder is damp and moist inside
(condensation). Turn off your camcorder
and leave it for about 1 hour in a cool
place. ➥page 79
The estimated recording time is calculated
The actual recording
by some references.
time is less than the
When you record an object that moves
estimated time.
fast, the actual recording time may be
shorten.
If you make a frequent recording or
deletion of fi les, the performance of the
The recording stops
built-in fl ash memory will be deteriorated.
automatically.
In this case, format the built-in memory
again.
When recording a
subject illuminated
This is not malfunctioning.
by bright light,
vertical line appear.
87_English
Explanation/Solution
).
Enregistrement
Problème
Appuyez sur le bouton MODE pour régler le
mode Enregistrement vidéo (
L'espace libre est insuffi sant pour enregistrer
la mémoire interne ou la carte mémoire.
Vérifi ez si la carte mémoire est protégée en
écriture ou si la carte mémoire SDHC est
Appuyer sur la touche
insérée.
d'enregistrement
La température interne de votre caméscope
start/stop ne lance
est exceptionnellement élevée. Eteignez-le et
pas l'enregistrement.
laissez-le de côté un instant dans un endroit
froid.
Votre caméscope est humide ou moite à l'
intérieur (condensation). Eteignez-le et
laissez-le de côté pendant 1 heure environ
dans un endroit froid. ➥page 79
La durée d'enregistrement prévue est calculée
La durée réelle de l'
selon certaines références.
enregistrement est
Si vous enregistrez un objet en mouvement
inférieure à la durée
rapide, la durée d'enregistrement actuelle peut
estimée.
diminuer.
Si vous faites fréquemment des
L'enregistrement
enregistrements ou supprimez des fi chiers,
s'arrête automatique-
la performance de la mémoire fl ash intégrée
ment.
sera détériorée. Dans ce cas, formatez la
mémoire intégrée une nouvelle fois.
Une ligne verticale
apparaît en cours d'
enregistrement d'
Il ne s'agit pas d'un dysfonctionnement.
un sujet fortement
illuminé.
Explication et/ou solution
).
French_87

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc-mx10pSc-mx10aSc-mx10au

Table des Matières