Displays
Symptom
All movies recorded with this memory
•
camcorder have 4:3 aspect ratio.
- It can occur when recording or viewing
The screen of TV or LCD
a 16:9-ratio image on the LCD screen.
screen displays distorted
For more details, see the display
images.
specifi cations. ➥page 55, 61
- If you want to display properly on your
TV, check out your TV type and set the
proper screen mode (4:3 aspect ratio).
The memory camcorder is in "Demo" mode.
•
Unknown image appears
Change the setting "Demo" to "Off". ➥page 68
on the LCD screen.
A warning indicator or message appears on
•
the screen. ➥page 81
This occurs if you disconnect the AC power
•
The afterimage remains
adaptor or remove the battery pack before
on the LCD screen.
turning the power off.
The image on the LCD
•
Ambient is too bright. Adjust the brightness
screen looks dark.
and angle of LCD.
Menu
Symptom
You cannot select grayed items in the current
•
recording/playback mode.
There are some functions you cannot
•
activate simultaneously. The following list
shows examples of unworkable combinations
of functions and menu items.
If you want to set the desired functions, do
not set the following items fi rst.
Menu items are grayed out.
<Cannot Use> <Because of the following setting>
Scene Mode(AE) Exposure ( Manual)
Most of menu items cannot be selected
•
when you set the EASY.Q function.
If there is no storage media inserted, it can
•
not be selected and will be dimmed on the
menu : " Memory Info", "Format", etc.
85_English
Explanation/Solution
Explanation/Solution
Écrans
Problème
Toutes les vidéos enregistrées avec le
•
caméscope numérique sont au format 4:3.
- Cela peut se produire en visionnant une image
au format 16:9 à l'écran ACL. Reportez-vous aux
L'écran du téléviseur
caractéristiques de l'écran pour plus de détails.
ou l'écran ACL
➥Pages 55, 61
affi che des images
- Si vous souhaitez que l'image s'affi che
déformées.
correctement sur votre téléviseur, vérifi ez le
format de ce dernier et réglez le format d'écran
(4:3) avant de débuter l'enregistrement.
Le caméscope à mémoire fl ash est en
•
mode "Demo"(Démo). Modifi ez le réglage
Une image inconnue
"Demo"(Démo) en "Off"(Off).➥page 68
apparaît à l'écran
Un message ou témoin
LCD.
•
d'avertissement apparaît à l'écran. ➥page 81
Cette éventualité se produit si vous débranchez
•
L'image rémanente
l'adaptateur CA ou retirez la batterie avant d'
reste à l'écran.
éteindre l'appareil.
La lumière ambiante est trop vive. Réglez la
L'image apparaît
•
luminosité et l'angle de l'écran ACL.
sombre sur l'écran LCD.
Menu
Problème
Il est impossible de sélectionner un
•
élément estompé (gris) dans la situation
d'enregistrement/lecture présente.
Certaines fonctions ne peuvent être activées
•
simultanément. La liste ci-après présente des
exemples de combinaisons de fonctions ou
d'éléments de menu incompatibles. Si vous
souhaitez défi nir ces fonctions, veuillez ne pas
Les éléments du menu
défi nir ces éléments en premier lieu.
< Utilisation impossible > Mode Scene (scène) (AE)
sont estompés.
< En raison des réglages suivants >
Exposure (Manual) (Temps de pose(manuel))
La plupart des éléments du menu ne sont pas
•
disponibles en mode EASY.Q.
Si aucun support de stockage n'est inséré, il
•
vous est donc impossible d'en sélectionner un
; il s'affi che en mode estompé dans le menu :
"Memory Info", "Format", etc.
Explication et/ou solution
Explication et/ou solution
French_85