Hydraulic System; Technical Specifications; Compliance - Certikin CTX QPA5S11001CT Notice D'installation, Mode D'emploi, Notice D'entretien

Hydraulic System

1
1
2

Technical specifications

Device manufactured in compliance with European CE directives.
•
Control panel assembled on a rigid PVC sheet
•
Power supply 230 V 50-60 Hz
•
Protection grade: IP65 (instrument metering pumps), IP55 (junction box), IP2X (outer container)
•
Environmental conditions: closed environment, maximum altitude 2000 m, ambient temperature
•
from 5°C to 40°C, maximum relative humidity 80% up to maximum 31° C (decreases linearly
until reaching 50% at 40°C)
Classification with regard to protection against direct contacts: CLASS I, the device is provided
•
with a protective conductor

Compliance

The device complies with the following directives:
2006/95/EC:
•
2004/108/EC:
•
4
2
Figure 2 - Probe holder
3
Figure3 – Hydraulic part
"Low voltage"
"Electromagnetic compatibility"
1 Sample water Inlet
2 Ground cable
3 Outlet water pipe ring fitting
4 Electrode D12 seat
3
4
1
2
3
4
Water flow inlet
In-line filter
Electrode holder
Water flow outlet
ENGLISH 47