Symbols Used On The Panel; General Terms And Conditions - Certikin CTX QPA5S11001CT Notice D'installation, Mode D'emploi, Notice D'entretien

Symbols used on the panel

The following table shows the diagrams, relative description and location of all graphic symbols present on the
panel and on any other device or external devices that can be connected.
DANGEROUS VOLTAGE
Symbol next to the terminals for
connection to line voltage.

General Terms and Conditions

Despite the utmost care in preparing this document, CERTIKIN cannot guarantee accuracy of all information
contained herein and cannot be held liable for any errors that this could entail, nor for any damage that may
result from use or application.
Products, materials, software and services in this document are subject to development in terms of presenting
features and operation. CERTIKIN thus reserves the right to make any changes without notice.
Copyright
It is forbidden to reproduce or copy this manual, even partially, by any means without the express consent of
CERTIKIN.
GENERAL REQUIREMENTS FOR SAFETY
Manufacturer's statement of responsibility
The CERTIKIN is considered responsible for safety, reliability and performance of the device if, and only if, it is
used under the following conditions:
ENGLISH
42
F
N
calibration, modifications or repairs must be carried out by qualified personnel and expressly
•
authorised by CERTIKIN;
opening of the device and access to its internal parts must only be carried out by qualified
•
maintenance personnel and specially authorised by CERTIKIN;
the environment in which the device is used must comply with current safety regulations;
•
the electrical system of the area where the device is located must be kept in perfect condition and
•
carried out professionally in accordance with the rules in force in the country of use;
for routine maintenance, only use original spare parts, otherwise the warranty will be rendered null
•
and void;
ATTENTION! CONSULT
DOCUMENTATION
Symbol placed at points where it is
appropriate to refer to the user manual
for important information.
PHASE
NEUTRAL
PROTECTIVE GROUND
DIRECTION OF
PASSAGE
Symbol placed in line with
hydraulic components of
the panel to show the flow
direction of analysis water.
Symbols placed in line
with connection of the
panel to the mains