Technical Information; Installation Considerations - Hansgrohe Citterio M 34822 1 Série Instructions De Montage / Mode D'emploi / Garantie

Tools Required / Outiles Utiles /
Herramientas Útiles
2

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
• Please read over these instructions thoroughly be-
• Protection against backflow is provided by a
• Keep this booklet and the receipt (or other proof
4 mm
9 mm
16 mm
English
spout
valve
this unit be installed by a licensed, professional
plumber.
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
double check valve in the sprayhead.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*
2.0 gpm
1½"
1½"
2⅜"