Hansgrohe Citterio M 34822 1 Série Instructions De Montage / Mode D'emploi / Garantie page 10

6
7
8
10
English
Place the valve and sealing ring on the mounting
surface.
Install the plastic washer, friction washer, metal
washer, and mounting nut.
If the mounting surface is greater than 1⅝", or if there
is insufficient space, omit the plastic washer.
Tighten the mounting nut.
Tighten the screws.
Connect the hot and cold supply hoses to the stops.
9 mm
16 mm
Use two wrenches.
Do not allow the supply hoses to
twist.