Intended Use; General Safety Rules - Black & Decker BDINF12 Mode D'emploi

English

INTENDED USE

Your BLACK+DECKER inflation station is designed to be used
in most vehicles from the standard 12 Volt socket to inflate
car and bike tires, balls, rafts, air mattresses, swimming pool
floats, etc. This product is intended for household, consumer
use only.

WARNING! Read all instructions before operating
product. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS

WARNINGS:
1 . Read these instructions.
2 . Keep these instructions.
3 . Heed all warnings.
4 . Follow all instructions.
5 . Do not use this apparatus near water. Keep the case dry
at all times.
6 . Clean only with dry cloth.
7 . Do not block any ventilation openings. Install in
accordance with the manuafacturer's instructions.
8 . Do not place near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers)
that produce heat.
9 . Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 . Protect the cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 . Only use attachments / accessories specified by
the manufacturer.
12 . Unplug unit when lightning is in the area or when unit is
not in use.
13 . Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
14 . Do not expose to dripping or splashing. WARNING: To
reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
15 . Do not operate near flammable materials, fumes or gases.
16 . Do not disassemble product, no user serviceable parts. Incorrect
reassembly may result in a risk of electric shock or fire..
17 . Provide adequate ventilation and refrain from placing
items on or around the product during operation.
18 . Keep this product out of the reach of children.
2
19 . Since the vibration produced by the inflator may cause it
to "walk", do not operate on a high shelf or other surface.
Operate at ground or bench level only.

GENERAL SAFETY RULES

• KEEP WORK AREA CLEAN. Cluttered areas and benches
invite injuries.
• CONSIDER WORK AREA ENVIRONMENT. Don't expose
power tools to rain.Don't use power tools in damp or
wet locations. Keep work area well lit. Do not use tool in
presence of flammable liquids, dust, or gases.
GUARD AGAINST ELECTRIC SHOCK. Prevent body
•
contact with grounded surfaces. For example; pipes,
radiators, ranges, and refrigerator enclosures.
• KEEP CHILDREN AWAY. Do not let visitors contact tool
or extension cord.All visitors should be kept away from
work area.
STORE IDLE TOOLS. When not in use,tools should be
•
stored in dry, and high or locked-up place — out of reach
of children.
• DON'T FORCE TOOL. It will do the job better and safer at
the rate for which it was intended.
USE RIGHT TOOL. Don't force small tool or attachment to
•
do the job of a heavy-duty tool. Don't use tool for purpose
not intended.
• DRESS PROPERLY. Do not wear loose clothing o rjewelry.
They can be caught in moving parts. Rubber gloves and non-
skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
USE SAFETY GLASSES. Also use face or dust mask if
•
operation is dusty.
• DON'T ABUSE CORD. Never carry tool by cord or yank it
to disconnect from receptacle. Keep cord from heat, oil,
and sharp edges.
SECURE WORK. Use clamps or a vise to hold work.It's
•
safer than using your hand and it frees both hands to
operate tool.
• DON'T OVERREACH. Keep proper footing and balance
at all times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and
•
clean for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect tool
cords periodically and if damaged, have repaired by
authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry,
clean, and free from oil and grease.
• DISCONNECT OR LOCK OFF TOOLS when not in use,
before servicing, and when changing accessories, such as
blades, bits, cutters.
REMOVE ADJUSTING KEYS AND WRENCHES. Form
•
habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
• AVOID UNINTENTIONAL STARTING. Don't carry tool with
finger on switch. Be sure switch is off when plugging in.
EXTENSION CORDS. Make sure your extension cord is in
•
good condition.When using an extension cord, be sure to
use one heavy enough to carry the current your product