Using Bluetooth - Technics OTTAVA S SC-C50 Manuel D'utilisation

Pairing a Bluetooth
• Turn on this unit, Bluetooth
the device near this unit.
• Turn on the Bluetooth
®
1 Press [ ] repeatedly to select " ".
• " " blinks at 1 second interval.
• " " blinks per second and this unit tries to
connect to the last connected Bluetooth
device. After the connection is complete,
proceed to step 4.
2 Press and hold [
• " " blinks at 1 second interval and this unit
enters the registration standby state.
3 Open the Bluetooth
screen, etc. on the Bluetooth
and select "Technics-SC-C50-
• " **** " stands for numbers unique to each
set.
• If the device name is set on the "Google
Home" app, the set name is displayed.
4 Play music by operating the
Bluetooth device.
®
Note
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this unit.
If a 9th device is paired, the device that has not
been used the longest will be replaced.
Bluetooth ® device
device
®
® device and place
feature of the device.
®
].
connection
®
® device,
".
****
Using B

Using Bluetooth

Listening to music stored on a
Bluetooth device
®
• If a Bluetooth
® device is already connected,
disconnect it.
1 Press [ ] repeatedly to select " ".
• " " blinks per second and this unit will
automatically try to connect to the last
connected Bluetooth
connection is complete, proceed to step 3.
2 Open the Bluetooth
screen, etc. on the Bluetooth
and select "Technics-SC-C50-
3 Play music by operating the
Bluetooth device.
®
Note
• Refer to the operating instructions of the
Bluetooth device for details.
®
• This unit can only be connected to one device
at a time.
• The Bluetooth
device will be disconnected if a
®
different audio source is selected.
Basic
®
device. After the
®
connection
®
® device,
".
****
15
(15)