Signature SHD6XPERI Instructions D’utilisation page 35

5.1 ÿ P ut the chimney on the cooker hood. Fix the lower chimney bracket on the wall
by 2 screws (4mm x30mm).
5.2ÿ Then pulling out the upper chimney upwards to the target height. Adjust
to reach the height required.
5.3ÿ Fix the upper chimney on the upper chimney bracket by 2 screws
(4x8mm). Then fix the upper chimney bracket on the wall. Before
fixing the bracket on the wall, you can decide the upper chimney bracket
fixing holes for installation.
Upper decorative chimney
(Inner)
Lower Chimney bracket
Lower decorative chimney
(Outer)
-35-