Signature SHD6XPERI Instructions D’utilisation page 33

Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation
of the appliance when air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity
are simultaneously in operation, the negative pressure in the room must be not
exceed 4 Pa (4×10 Bar)
-5
1. Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten the bracket
onto the wall with the screws & screw plugs provided.
Screw
(4mm x 30mm)
Holes on wall
Screw plug
Wall bracket
2. Offer up the cooker hood and hang onto the wall bracket hook.
-33-