Signature SHD6XPERI Instructions D’utilisation page 34

3. We need the secure screws to make sure the hood is stable on the wall .After
put the cooker hood on the bracket , open the filter , mark and drill 4 holes and
fasten the hood on the wall with 2 wall plugs and 2 ST
Wall plugs
4. Fix the adapter to the one-way-valve air outlet first, Then place the plastic duct
on the cooker hood.
5. The lower chimney bracket is used to fix the upper decorative chimney and
lower decorative chimney.
Use 2pcs 4x8mm screws to attach lower and upper chimney together. Before
attaching the bracket to the chimney, decide the location of lower chimney
bracket fixing holes for fixing the lower chimney bracket in the later step.
Noted:
Do not fasten screws too much, make sure upper decorative chimney
can be telescopically adjusted after assembled.
x
-34-
4 x
x
30mm screws.
Screws
(ST4 x 30mm)