Danby Designer DPA110B2WDD Guide D'utilisation Et Soins De Propriètaire page 13

Installation Instructions
INSTALLATION IN A
DOUBLE- HUNG SASH
WINDOW
1. Measure the adhesive foam seal to fit the window stool. Then cut the
foam seal to the proper length and attach it to the window stool. Fig.9
2. Adjust the length of the window slider kit to fit the width of the window.
Shorten the adjustable window kit to fit the width of the window if less
than 28.3 inches. Open the window sash and place the window slider kit
on the window stool. Fig.10
3. Cut the foam seal (adhesive type) to the proper length and attach it on
the top of the window. Shown in Fig.11
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and outer window sash. Shown in
Fig.12.
28.3" ~ 81.5"
11
Foam seal A
(adhesive type)
Fig.9
Window Kit
Fig.10
Window Stool
Window Kit
Fig.11
Window Stool
Foam seal
Fig.12