Installation
Installation
Step 1: Select installation location for the repeater
Select an installation location which:
is within the wireless range of the alarm panel (max. 500 m outdoors).
is within the wireless range of the components which are to be repeated
(max. 500 m outdoors)
Before starting installation, identify a suitable installation location for the repeater
using the wireless test box.
Note
Incorrect or unclean installation work may lead to erroneous interpretation of sig-
nals, the consequences of which may include false alarms. The costs incurred by
potential dispatches of rescue services, such as the fire service or police, must
be borne by the operator of the system.
To ensure trouble-free operation, the repeater must NOT be installed:
at a distance of less than 1 m from large metal structures such as metal
doors or frames, water tanks, refrigerators or vehicles
at a distance of less than 1 m from household electrical systems, distributors
or metal pipes
inside metal housings
close to the main power supply, or close to water or gas pipelines
close to high-voltage devices or electronic devices such as computers,
photocopiers or other wireless devices
Step 2: Open the cover of the repeater
Open the two covers of the two cover fixing screws
Remove the screws and open the cover (Figure 2)
26 |
EN
Figure 2