Functional Principle And Features; General; Main Features - Abus FUMO50010 Instructions D'installation Et D'utilisation

Functional principle and features

General

Functional principle and features
General
The repeater is an additional component for use with Secvest alarm panels FUAA50xxx. It is used
to increase the transmission and reception range between Secvest alarm panels and wireless
components. The repeater is powered by an external power supply and is equipped with batteries
in order to bridge power failures. It is designed for wall installation.

Main features

 Simple installation
 Monitors voltage
 500 m range outdoors
 Components can be assigned directly on the
alarm panel or via the WBI
 Can be updated via the USB port
(upcoming feature)
The following components are always repeated if they are within the repeater's wire-
less range:
Note
 Remote control FUBE5001x
 All user-specific hold-up devices
 All user-specific emergency transmitters (medical emergency, care alarm)
The alarm panel is repeated for the following purposes:
 Broadcast information of the alarm panel (for communication to the wireless
remote control)
 Information module
 RF outputs
 Outdoor and indoor siren commands.
24 | EN
General Safety: 2001/95/EC
This product must be installed by a qualified service engineer.
 Cover and wall tamper contact
 Shock-resistant construction from polycar-
bonate
 Hinged lid for easy installation
 Jamming detection