Specifications; Limited Warranty - Timberpro CS2500 Mode D'emploi

11. Specifications

Power unit:
Displacement (cm 3 ): ............................................. 25.4
Fuel: ................ Mixture (Gasoline 25 : Two-cycle oil 1)
Fuel tank capacity (cm
Chain oil: ................................. Motor oil SAE# 10W-30
Oil tank capacity (cm 3 ): .......................................... 160
Carburetor: ......................................... Diaphragm type
lgnition system:: .......................................... Solid State
Spark plug: ................................................ TORCH L7T
Oil feeding system: ......................... Mechanical pump
Max. speed ............................................ 12,500 (min
Idle speed ................................................ 2,900 (min

12. Limited Warranty

Should any failure occur on the product under normal
operating conditions within the applicable warranty pe-
riod, the failed part will be replaced or repaired free of
charge by a TIMBERPRO authorized dealer.
WARRANTY PERIOD: 2 years (6 months if used profes-
sionally, and 30 days if used for rental purpose) from the
date of initial purchase.
IN CASE OF FAILURE THE PREFERENCE IS GIVEN
TO A REPLACEMENT OR REPARATION OF THE FA-
ULTY PART IN THE FIRST PLACE. ONLY THE COM-
PANY OR AN AUTHORIZED DEALER CAN DECIDE
IF AN ITEM SHOULD BE REPLACED ENTIRELY. TH-
IS IS NOT THE PURCHASER'S CHOICE.
THE PURCHASER SHALL BEAR COSTS OF TRANS-
PORTING THE UNIT TO / FROM TIMBERPRO
LER.
THE PURCHASER SHALL NOT BE CHARGED FOR DI-
AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-
NATION THAT A WARRANTED PART IS DEFECTIVE, IF
THE DIAGNOSTIC WORK IS PERFORMED AT THE
DEALER.
THE PURCHASER OR OWNER IS RESPONSIBLE FOR
THE PERFORMANCE OF THE REQUIRED MAINTE-
NANCE AS DEFINED BY THE MANUFACTURER IN THE
OWNER/OPERATOR MANUAL.
ANY WARRANTED PART WHICH IS NOT SCHEDULED
FOR REPLACEMENT AS REQUIRED MAINTENANCE,
OR WHICH IS SCHEDULED ONLY FOR REGULAR IN-
SPECTION TO THE EFFECT OF REPAIR OR "REPLACE
AS NECESSARY" SHALL BE WARRANTED FOR THE
WARRANTY PERIOD. ANY WARRANTED PART WHICH
IS SCHEDULED FOR REPLACEMENT AS REQUIRED
MAINTENANCE SHALL BE WARRANTED FOR THE PE-
RIOD OF TIME UP TO THE FIRST SCHEDULED
REPLACEMENT POINT FOR THE PART.
3 ): ....................................... 230
Dimensions (L x W x H) (mm): ............ 265 x 220 x 220
Dry weight
Power unit only (kg): ............................................... 2.9
Power: ......................................... 0.9/8,500 (kw/min
Cutting head:
<Sprocket bar>
Sprocket: .................................................................. 6T
Chain speed at max. power ......................... 17.1 (m/s)
Guide bar
Type: ................................................ Sprocket nose
Size (in. (cm)): .............................................. 10 (25)
-1 )
Saw chain
-1 )
Pitch (in. (mm)): ........................................ 3/8 (9.53)
Gauge (in. (mm)): ................................... 0.05 (1.3)
Specifications are subject to change wihout notice.
ANY REPLACEMENT PART THAT IS EQUIVALENT IN
PERFORMANCE AND DULABILITY MAY BE USED IN
NON-WARRANTY MAINTENANCE OR REPAIRS, AND
SHALL NOT REDUCE THE WARRANTY OBLIGATION
OF THE COMPANY.
THE COMPANY IS LIABLE FOR DAMAGES TO OTHER
ENGINE COMPONENTS CAUSED BY THE FAILURE OF
A WARRANTED PART STILL UNDER WARRANTY.
THE WARRANTY DOES NOT APPLY TO THOSE UNITS
WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF
INSTRUCTION LISTED IN THE OWNER/OPERATOR
MANUAL FOR PROPER USE AND MAINTENANCE OF
THE UNITS ACCIDENT MISHANDLING, ALTERATION,
ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS
DEA-
OR ACCESSORIES OTHER THAN THOSE SPECIFIED
BY THE COMPANY, OR OTHER CAUSES BEYOND THE
COMPANY'S CONTROL.
THIS WARRANTY DOES NOT COVER THOSE PARTS
REPLACED BY NORMAL WEAR OR HARMLESS
CHANGES IN THEIR APPEARANCE.
THERE ARE NO OTHER EXPRESS WARRANTIES.
IMPLIED WARRANTIES INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME
USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE
ORIGINAL DELIVERY DATE.
LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGE UNDER ANY AND ALL WARRANTIES ARE
EXCLUDED.
IF YOU NEED TO OBTAIN MORE INFORMATION,
PLEASE CALL YOUR NEAREST SERVICE CENTER,
OR PLEASE CHECK TIMBERPRO WEB SITE
http://www.techandtrade.com/
GB 17
-1 )