NEC MultiSync LCD1720M Manuel D'utilisation page 9

Downloaded from www.Manualslib.com
Quick Start
–continued
6. This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when
installing.
To meet the safety requirements, the monitor must be mounted to an arm
which guaranties the necessary stability under consideration of the
weight of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS
mark).
Specifications
4-SCREWS (M4)
(MAX depth: 10mm)
If using other screws than
ones included, first check
depth of the hole.
Weight of LCD Assembly : 5.5kg (MAX)
manuals search engine
Replace screws
100mm
7
Thickness of
bracket (arm)
2.0~3.2mm
Tighten all
screws.