DYNAMIC
EN
®
10
Connect power cabling in battery.
10
TAKE CARE WITH POLARITY.
FUSE
IMPORTANT: Due to the complex system of electronic regulation of the equipment, the current
!
connection must be made directly to the vehicle battery and not to any other point which services
other accessories of the vehicle, taking the precaution to not invert the polarity when making the
connection (1). If polarity is inverted, the control plate does not come on and the unit does not
work.
IMPORTANT: Check the User Manual before starting up.
-
+
11
Open the cabin and pass the cabling through
the most appropriate area towards the
capacitor, securing with clamps or flanges.