ohmex HET 1031 FAN Manuel D'utilisation page 47

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HET 1031 FAN
• It's necessary to check this fundamental safety condition and, in case of doubts, ask for
an accurate check of the system by professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused by the
lack of grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect the power
plug from the outlet and wait for the appliance to be completely cooled.
• Don't connect the appliance to the power supply through external timers or remote
control systems.
Keep the power cord away from the appliance hot parts.
• Do not let the power cord slide under carpets, etc.
• Do not cover the heater in order to avoid its overheating.
• There are no spare parts which can be replaced by the user inside the appliance. Please
refer to qualified technical personnel in case of need.
Do not leave the appliance unattended while it's working.
The appliance heats up during use. Operate carefully to not touch
the appliance high temperature accessible parts and to avoid
eventual burns.
Do not place the working appliance under shelves, tables, etc. Leave at
least 20 cm around the appliance and 100 cm above.
• Do not lay the power cord on the working appliance.
• Do not install the appliance inside wardrobes.
• Never immerse the appliance and the remote control in water or in other liquids.
• Do not let water fall on the appliance.
If that happens, disconnect the plug from the power outlet and wait for everything to
be completely dry before reusing the appliance.
• Do not put your fingers or other foreign matter between the grids of the protection
grating. You would run the risk of electric shock and of being consequently injured.
GENERAL WARNINGS
EN
43

Publicité

Table des Matières
loading

Table des Matières