ohmex HET 1031 FAN Manuel D'utilisation page 46

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
comply with existing safety standards, making sure however that the current carrying
capacity limits, marked on the single adapter and on the extension cables, as well as
the maximum power limit marked on the multiple adapter, are not exceeded.
• The use of any electric appliance involves compliance with certain basic rules. In
particular:
- never touch the appliance with wet or damp hands;
- never use the appliance with bare feet;
- never pull the power cord or the appliance to remove the plug from the
wall socket;
- never leave the appliance outdoors where it can be exposed to the weather
conditions (rain, such, etc.);
- never let children or disabled persons use the appliance unattended.
• Turn off the appliance and do not tamper with it in any way if it becomes faulty and/or
operates in an incorrect way. Repairs must only be carried out by a customer service
centre authorized by the manufacturer. Always insist on genuine spare parts.
Failure to comply with this recommendation could impair the safety of the appliance.
• Should you decide to stop using an appliance of this type, remember to render it unusable
by cutting off the power cable after having removed the plug from the power socket.
Also make sure that all parts of the appliance liable to constitute a danger are made
harmless, particularly for children who could decide to use an old appliance as a toy.
The installation must be carried out following the manufacturer instructions.
A wrong installation could cause damages to people, animals or things, for
which the manufacturer cannot be considered liable.
• To avoid dangerous overheatings, to straighten the whole power cord and to use the
appliance as described in the "USE" paragraph is recommended.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from the mains
power supply when the appliance is not used.
• If the power cord of this appliance is damaged, it must be changed exclusively by a technical
assistance centre authorized by the manufacturer, since special tools are necessary.
The electrical safety of this appliance is guaranteed only when it is correctly
connected to an effective grounding system as specified by the current
norms on electrical safety.
42
GENERAL WARNINGS
HET 1031 FAN

Publicité

Table des Matières
loading

Table des Matières