Philips PT925 Manuel D'utilisation page 26

English
26
Problem
PT920CC:The
shaver is not
entirely clean
after I clean it
in the Jet Clean
System.
Possible cause
The temperature
of the shaver is too
high. In this case,
the shaver does not
work.
The cleaning fluid
in the cleaning
chamber is soiled.
The cleaning fluid
level is too low. If the
fluid volume in the
cleaning chamber
drops below the
minimum level
during the cleaning
program, the
program aborts.The
cleaning symbol and
the 'fluid low' symbol
flash at intervals
and the holder
returns to its starting
position.
You have used
another cleaning
fluid than the original
Philips cleaning fluid.
Solution
As soon as the temperature
of the shaver has dropped
sufficiently, you can switch
on the shaver again.
Empty and rinse the
cleaning chamber (see
section 'Cleaning the shaving
unit in the Jet Clean System'
in chapter 'Cleaning and
maintenance').
Refill the cleaning chamber
with cleaning fluid up to
the MAX level (see section
'Cleaning the shaving unit
in the Jet Clean System'
in chapter 'Cleaning and
maintenance').
Only use Jet Clean solution
HQ200.