B3C pesage Comptage Computing Sérénité 9860 Série Manuel D'utilisation page 22

9860
SAFETY INSTRUCTIONS
Before using the scale, please read with care the information given in the op-
erating manual. It contains important instructions for installation, proper use
and maintenance of the appliance.
B3C SAS shall not liable for damages arising out of failure to heed the follow-
ing instructions: When using electrical components under increased safety
requirement, always comply with the appropriate regulations. Never perform
work on the appliance while the power is switched on.
Improper installation will render the warranty null and avoid. Ensure the volt-
age marked on the power supply unit matches your mains power supply. The
device meets the requirement for electromagnetic compatibility. Do not ex-
ceed the maximum values specified in the applicable standards.
CLEANING
It's sufficient to clean the scale with a moist cloth and a regular cleaning agent. Do not use any scourers.
MAINTENANCE
The scale does not require any routine maintenance. However, we recommend to check the scale's
precision at regular intervals.
NOTE
Interference suppression of the unit corresponds to the valid EU directive 89/336/EEC. The display
value may be influenced by extreme electrostatic and electro-magnetic interference, e.g. operation of
a radio unit or a mobile phone in the immediate vicinity of the unit. When the electrostatic interference
is no longer present, the unit can again be used for its intended purpose. You may need to switch it on
again. If there is permanent electrostatic interference, we recommend to connect the platform with the
ground. The scale is a measuring instrument. Air currents, vibrations, rapid changes in temperature
and direct sunlight may have an effect on the accuracy of the scale.
WARRANTY - LIABILITY
This equipment is a measuring device.
No responsibility shall be accepted for damage caused through any of the following reasons: unsuit-
able or improper storage or use, incorrect or commissioning by the owner or third parties, natural wear,
changes or modifications, incorrect or negligent handling, overuse, chemical, electrochemical or elec-
trical interference. If operating, climatic or any other influences lead to a major change in conditions or
material quality, the warranty for perfect until functioning shall be rendered null and void. Always keep
the original packaging in case you have to return the scale.
22
www.b3c-pesage.fr